24,000 m² Foundry with Full In-House Production
Three production workshops covering 24,000 m², behind 19+ years of casting experience. Complete melting, moulding, उष्मा उपचार, machining and inspection facilities — every step is under our own roof.
हमारी फाउंड्री के अंदर
Three production workshops covering 24,000 m², located in Anxi, क्वानझोउ, फ़ुज़ियान, चीन, with convenient logistics access to Ningbo and Shanghai ports.
Production Equipment List
Complete in-house facilities from raw material to finished casting — no subcontracting for critical steps.
Melting Workshop
5 Ton Medium-Frequency Induction Furnace
1 set
For large heats of high manganese steel and alloy castings.
4 Ton Medium-Frequency Induction Furnace
1 set
Medium-batch melting with precise temperature control.
3 Ton Medium-Frequency Induction Furnace
2 sets
Flexible batch sizes for different wear parts.
1.25 Ton Medium-Frequency Induction Furnace
3 sets
Small heats for precise chemistry and fast sampling.
Moulding Workshop
Lost-Foam (EPC) Production Line
2 lines
For complex castings with high dimensional accuracy and smooth surfaces.
V-Process (Vacuum) Production Line
1 line
V-process moulding for precise dimensions and clean surface finish.
Sand Casting Facilities
Available
Traditional sand moulding for large and heavy wear-resistant castings.
Heat Treatment Workshop
20 Ton Heat-Treatment Furnace
4 sets
Large furnaces for solution treatment of high manganese steel.
15 Ton Heat-Treatment Furnace
4 sets
For quenching, tempering and stress relieving of wear parts.
10 Ton Heat-Treatment Furnace
3 sets
Flexible heat-treatment capacity for medium and small castings.
Machining Workshop
Large Vertical Lathe
2 sets
For large-diameter castings such as mantles and girth gears.
Medium Vertical Lathe
4 sets
For medium-size wear parts and structural castings.
CNC Lathe
3 sets
Precision CNC turning for shafts, sleeves and cylindrical parts.
Hydraulic Straightening Press
3 sets
For correcting deformation and ensuring dimensional accuracy.
Lifting Equipment
13 sets
Safe handling of castings from 1 kg to 6 tons.
Inspection Center
Imported Laboratory Equipment
1 set
Advanced instruments for chemical and metallographic analysis.
Domestic Laboratory Equipment
1 set
Supporting chemical composition and mechanical testing.
Hardness Testing Equipment
1 set
Brinell and Rockwell hardness verification on every batch.
Dimensional Inspection Tools
Full set
Calipers, gauges and templates for dimensional control.
Quality Is Built into Every Step
From the moment raw material arrives, every casting is tracked and inspected to ensure it meets customer specifications.
आईएसओ 9001 Certified
Our quality management system is certified to ISO 9001 with full process control and documentation.
Chemical Composition Report
Every heat comes with a chemical composition report covering C, और, एम.एन., करोड़, एमओ, पी, S and other elements.
Mechanical Property Test
तन्यता ताकत, impact toughness and hardness tested for every batch, with results in the inspection report.
आयामी निरीक्षण
Dimensional checks against customer drawings and OEM tolerances.
तृतीय-पक्ष निरीक्षण
SGS, BV and other third-party inspections available on customer request.
सामग्री का पता लगाने की क्षमता
प्रत्येक कास्टिंग का पता उसकी ऊष्मा संख्या से लगाया जा सकता है, mould and operator — full traceability from raw material to shipment.
Send Us Your Spec — We Quote Within 12 Hours
Whether you need OEM wear parts or custom castings, our engineers are ready to help.
संबंधित तकनीकी जानकारी
घिसे-पिटे हिस्सों का चयन सामग्री के आधार पर किया जाता है, अनुप्रयोग और गुणवत्ता डेटा एक साथ. ये पृष्ठ उस निर्णय के प्रत्येक भाग को कवर करते हैं.
उत्पादों
Crusher wear parts by equipment type — jaw, कोन, impact, hammer, grinding mill and custom castings.
और पढ़ें →अनुप्रयोग
खनन के लिए घिसे-पिटे हिस्सों का चयन कैसे किया जाता है?, उत्खनन, सकल, सीमेंट, कोयला, पुनर्चक्रण और मिट्टी कार्य कर्तव्य.
और पढ़ें →सामग्री
एमएन13, एमएन18, एमएन22, Mn13Cr2, Mn18Cr2, उच्च क्रोम मिश्र धातु लोहा और कार्बन स्टील - रसायन विज्ञान, कठोरता और प्रत्येक ग्रेड कहां है.
और पढ़ें →उत्पादन
पैटर्न बनाने से लेकर अंतिम पैकिंग तक नौ नियंत्रित उत्पादन चरण, और प्रत्येक चरण को नियंत्रित क्यों किया जाता है.
और पढ़ें →गुणवत्ता
कच्चे माल का निरीक्षण, रासायनिक विश्लेषण, कठोरता और यांत्रिक परीक्षण, आयामी निरीक्षण और पता लगाने की क्षमता.
और पढ़ें →मामले का अध्ययन
एप्लिकेशन प्रोफ़ाइल दिखाती है कि ग्रेड और प्रोफ़ाइल चयन ने वास्तविक क्रशिंग कर्तव्यों में पहनने के जीवन को कैसे बदल दिया.
और पढ़ें →