24,000 m² Foundry with Full In-House Production
Three production workshops covering 24,000 m², behind 19+ years of casting experience. Complete melting, moulding, tratamiento térmico, machining and inspection facilities — every step is under our own roof.
Dentro de nuestra fundición
Three production workshops covering 24,000 m², located in Anxi, Quanzhou, fujián, Porcelana, with convenient logistics access to Ningbo and Shanghai ports.
Production Equipment List
Complete in-house facilities from raw material to finished casting — no subcontracting for critical steps.
Melting Workshop
5 Ton Medium-Frequency Induction Furnace
1 set
For large heats of high manganese steel and alloy castings.
4 Ton Medium-Frequency Induction Furnace
1 set
Medium-batch melting with precise temperature control.
3 Ton Medium-Frequency Induction Furnace
2 sets
Flexible batch sizes for different wear parts.
1.25 Ton Medium-Frequency Induction Furnace
3 sets
Small heats for precise chemistry and fast sampling.
Moulding Workshop
Lost-Foam (EPC) Production Line
2 lines
For complex castings with high dimensional accuracy and smooth surfaces.
V-Process (Vacuum) Production Line
1 line
V-process moulding for precise dimensions and clean surface finish.
Sand Casting Facilities
Available
Traditional sand moulding for large and heavy wear-resistant castings.
Heat Treatment Workshop
20 Ton Heat-Treatment Furnace
4 sets
Large furnaces for solution treatment of high manganese steel.
15 Ton Heat-Treatment Furnace
4 sets
For quenching, tempering and stress relieving of wear parts.
10 Ton Heat-Treatment Furnace
3 sets
Flexible heat-treatment capacity for medium and small castings.
Machining Workshop
Large Vertical Lathe
2 sets
For large-diameter castings such as mantles and girth gears.
Medium Vertical Lathe
4 sets
For medium-size wear parts and structural castings.
CNC Lathe
3 sets
Precision CNC turning for shafts, sleeves and cylindrical parts.
Hydraulic Straightening Press
3 sets
For correcting deformation and ensuring dimensional accuracy.
Lifting Equipment
13 sets
Safe handling of castings from 1 kg to 6 montones.
Inspection Center
Imported Laboratory Equipment
1 set
Advanced instruments for chemical and metallographic analysis.
Domestic Laboratory Equipment
1 set
Supporting chemical composition and mechanical testing.
Hardness Testing Equipment
1 set
Brinell and Rockwell hardness verification on every batch.
Dimensional Inspection Tools
Full set
Calipers, gauges and templates for dimensional control.
Quality Is Built into Every Step
From the moment raw material arrives, every casting is tracked and inspected to ensure it meets customer specifications.
ISO 9001 Certified
Our quality management system is certified to ISO 9001 with full process control and documentation.
Chemical Composition Report
Every heat comes with a chemical composition report covering C, Y, Minnesota, Cr, Mo, PAG, S and other elements.
Mechanical Property Test
Tensile strength, impact toughness and hardness tested for every batch, with results in the inspection report.
Dimensional Inspection
Dimensional checks against customer drawings and OEM tolerances.
Third-Party Inspection
SGS, BV and other third-party inspections available on customer request.
Material Traceability
Every casting is traceable to its heat number, mould and operator — full traceability from raw material to shipment.
Send Us Your Spec — We Quote Within 12 Horas
Whether you need OEM wear parts or custom castings, our engineers are ready to help.
Información técnica relacionada
Las piezas de desgaste se seleccionan según el material., datos de aplicación y calidad juntos. Estas páginas cubren cada parte de esa decisión..
Productos
Crusher wear parts by equipment type — jaw, cono, impact, hammer, grinding mill and custom castings.
Leer más →Aplicaciones
Cómo se seleccionan las piezas de desgaste para la minería, cantera, agregar, cemento, carbón, deber de reciclaje y movimiento de tierras.
Leer más →Materiales
mn13, mn18, mn22, Mn13Cr2, Mn18Cr2, Hierro y acero al carbono con alto contenido de cromo: química., Dureza y dónde pertenece cada grado..
Leer más →Fabricación
Los nueve pasos de producción controlados desde la confección del patrón hasta el embalaje final., y por qué cada paso está controlado.
Leer más →Calidad
Inspección de materia prima, análisis químico, pruebas de dureza y mecanicas, inspección dimensional y trazabilidad.
Leer más →Estudios de caso
Perfiles de aplicaciones que muestran cómo la selección de grados y perfiles cambió la vida útil en tareas reales de trituración..
Leer más →